Static domain name resolution configuration example
Network requirements
As shown in Figure 43, the host at 1::2 is named host.com. Configure static IPv6 DNS on the device so that the device can use the easy-to-remember domain name rather than the IPv6 address to access the host.
Figure 43: Network diagram
Configuration procedure
# Configure a mapping between host name host.com and IPv6 address 1::2.
<Device> system-view [Device] ipv6 host host.com 1::2
# Verify that the device can use static domain name resolution to resolve domain name host.com into IPv6 address 1::2.
[Sysname] ping ipv6 host.com Ping6(56 data bytes) 1::1 --> 1::2, press CTRL_C to break 56 bytes from 1::2, icmp_seq=0 hlim=128 time=1.000 ms 56 bytes from 1::2, icmp_seq=1 hlim=128 time=0.000 ms 56 bytes from 1::2, icmp_seq=2 hlim=128 time=1.000 ms 56 bytes from 1::2, icmp_seq=3 hlim=128 time=1.000 ms 56 bytes from 1::2, icmp_seq=4 hlim=128 time=0.000 ms --- Ping6 statistics for host.com --- 5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss round-trip min/avg/max/std-dev = 0.000/0.600/1.000/0.490 ms