buffer total-shared
Use buffer total-shared to set the total shared-area ratio.
Use undo buffer total-shared to restore the default.
Syntax
buffer egress [ slot slot-number ] cell total-shared ratio ratio-value
undo buffer egress [ slot slot-number ] cell total-shared
Default
The total shared-area ratio is 97% of the buffer.
Views
System view
Predefined user roles
network-admin
Parameters
egress: Specifies the egress buffer.
slot slot-number: Specifies an IRF member device by its member ID (slot number). If you do not specify an IRF member device, this command applies to all IRF member devices.
cell: Specifies cell resources.
ratio ratio-value: Specifies the ratio of the shared area in percentage.
Usage guidelines
After you set the total shared-area ratio, the remaining buffer space is automatically assigned to the fixed area.
Examples
# Configure the shared area to use 65% space of cell resources in the egress buffer of IRF member device 2.
<Sysname> system-view [Sysname] buffer egress slot 2 cell total-shared ratio 65