burst-mode enable

Use burst-mode enable to enable the Burst feature.

Use undo burst-mode enable to disable the Burst feature.

Syntax

burst-mode enable

undo burst-mode enable

Default

The Burst feature is disabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

The Burst feature is especially useful for reducing packet losses under the following circumstances:

• Traffic enters a device from a high-speed interface and goes out of a low-speed interface.

• Traffic enters a device from multiple same-rate interfaces and goes out of an interface with the same rate.

The Burst feature takes effect only on known unicast packets.

Examples

# Enable the Burst feature.

<Sysname> system-view
[Sysname] burst-mode enable