SFP+ port
The switch provides SFP+ ports. You can install the 1000 Mbps SFP transceiver modules in Table 16, the SFP+ transceiver modules in Table 17, and the SFP+ cables in Table 18 in the SFP+ ports as needed.
Table 17: SFP+ transceiver modules available for the SFP+ ports
Product Code | HPE description | Central wavelength (nm) | Connector | Fiber diameter (µm) | Modal bandwidth (MHz × km) | Max transmission distance |
|---|---|---|---|---|---|---|
JD092B | HPE X130 10G SFP+ LC SR Transceiver | 850 | LC | Multi-mode, 50/125 | 2000 | 300 m (984.25 ft) |
500 | 82 m (269.03 ft) | |||||
400 | 66 m (216.54 ft) | |||||
Multi-mode, 62.5/125 | 200 | 33 m (108.27 ft) | ||||
160 | 26 m (85.30 ft) | |||||
JD094B | HPE X130 10G SFP+ LC LR Transceiver | 1310 | LC | Single-mode, 9/125 | N/A | 10 km (6.21 miles) |
Table 18: SFP+ cables available for the SFP+ ports
Product code | HPE description | Max transmission distance |
|---|---|---|
JD095C | HPE X240 10G SFP+ SFP+ 0.65m DA Cable | 0.65 m (2.13 ft) |
JD096C | HPE X240 10G SFP+ SFP+ 1.2m DA Cable | 1.2 m (3.94 ft) |
JD097C | HPE X240 10G SFP+ SFP+ 3m DA Cable | 3 m (9.84 ft) |
JG081C | HPE X240 10G SFP+ SFP+ 5m DA Cable | 5 m (16.40 ft) |
![[NOTE: ]](images/note.png) | NOTE: As a best practice, use HPE 1000 Mbps SFP transceiver modules, SFP+ transceiver modules, or SFP+ cables for the SFP+ ports on the switch. The HPE 1000 Mbps SFP and SFP+ transceiver modules are subject to change over time. For the most up-to-date list of SFP and SFP+ transceiver modules, contact your Hewlett Packard Enterprise sales representative or technical support engineer. | |
For more information about the 1000 Mbps SFP transceiver modules, SFP+ transceiver modules, and SFP+ cables, see HPE Comware-Based Devices Transceiver Modules User Guide.
Figure 51: SFP+ cable
(1) Connector | (2) Pull latch |
|---|