Configuring basic IRF settings
After you install the IRF member switches, power on the switches, and log in to each IRF member switch (see HPE FlexNetwork 5130 EI Switch Series Fundamentals Configuration Guide) to configure their member IDs, member priorities, and IRF port bindings.
Follow these guidelines when you configure the switches:
Assign the master switch higher member priority than any other switch.
Bind physical ports to IRF port 1 on one switch and to IRF port 2 on the other switch. You perform IRF port binding before or after connecting IRF physical ports depending on the software release.
Execute the display irf configuration command to verify the basic IRF settings.
For more information about configuring basic IRF settings, see HPE FlexNetwork 5130 EI Switch Series IRF Configuration Guide.