bfd echo-source-ip

Syntax

bfd echo-source-ip ip-address

undo bfd echo-source-ip

View

System view

Default level

2: System level

Parameters

ip-address: Source IP address of BFD echo packets.

Description

Use bfd echo-source-ip to configure the source IP address of BFD echo packets.

Use undo bfd echo-source-ip to remove the configured source IP address of BFD echo packets.

Do not configure the source IP address of the BFD echo packets to belong to the same network segment as any interface address of the device. Otherwise a large amount of ICMP redirect packets may be sent by the remote device, causing network congestion.

Examples

# Configure the source IP address of echo packets as 10.1.1.1.

<Sysname> system-view
[Sysname] bfd echo-source-ip 10.1.1.1