portal nas-id-profile

Syntax

portal nas-id-profile profile-name

undo portal nas-id-profile

View

VLAN interface view

Default level

2: System level

Parameters

profile-name: Specifies the name of the profile that defines the binding relationship between VLANs and NAS IDs, a case-insensitive string of 1 to 16 characters. The profile can be configured by using the aaa nas-id profile command. For more information about this command, see "AAA configuration commands"

Description

Use portal nas-id-profile to specify a NAS ID profile for the interface.

Use undo portal nas-id-profile to cancel the configuration.

By default, an interface is not specified with any NAS ID profile.

If an interface is specified with a NAS ID profile, the interface will prefer to use the binding defined in the profile. If no NAS ID profile is specified for an interface or no matching binding is found in the specified profile, the device uses the device name as the interface NAS ID.

Examples

# Specify NAS ID profile aaa for VLAN-interface 2.

<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] portal nas-id-profile aaa