authorization portal

	NOTE: This command is available only on the HPE 3100 v2 EI switches.

Syntax

authorization portal { local | none | radius-scheme radius-scheme-name [ local ] }

undo authorization portal

View

ISP domain view

Default level

2: System level

Parameters

local: Performs local authorization.

none: Does not perform any authorization exchange. In this case, an authenticated portal user can access the network directly.

radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of 1 to 32 characters.

Description

Use authorization portal to configure the authorization method for portal users.

Use undo authorization portal to restore the default.

By default, the default authorization method for the ISP domain is used for portal users.

The specified RADIUS scheme must have been configured.

The RADIUS authorization configuration takes effect only when the authentication method and authorization method of the ISP domain use the same RADIUS scheme.

Related commands: local-user, authorization default, and radius scheme.

Examples

# Configure ISP domain test to use local authorization for portal users.

<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal local

# Configure ISP domain test to use RADIUS scheme rd for authorization of portal users and use local authorization as the backup.

<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal radius-scheme rd local