authorization login

Syntax

authorization login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none | radius-scheme radius-scheme-name [ local ] }

undo authorization login

View

ISP domain view

Default level

2: System level

Parameters

hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a case-insensitive string of 1 to 32 characters.

local: Performs local authorization.

none: Does not perform any authorization exchange. After passing authentication, FTP users can access the root directory of the switch, and other login users can access only the commands of Level 0.

radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of 1 to 32 characters.

Description

Use authorization login to configure the authorization method for login users through the console port, Telnet, or FTP.

Use undo authorization login to restore the default.

By default, the default authorization method for the ISP domain is used for login users.

The specified RADIUS or HWTACACS scheme must have been configured.

The RADIUS authorization configuration takes effect only when the authentication method and authorization method of the ISP domain use the same RADIUS scheme.

Related commands: local-user, authorization default, hwtacacs scheme, and radius scheme.

Examples

# Configure ISP domain test to use local authorization for login users.

<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization login local

# Configure ISP domain test to use RADIUS authorization scheme rd for login users and use local authorization as the backup.

<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization login radius-scheme rd local