hello-option holdtime (IPv6 PIM view)

Use hello-option holdtime to set the IPv6 PIM neighbor lifetime globally.

Use undo hello-option holdtime to restore the default.

Syntax

hello-option holdtime time

undo hello-option holdtime

Default

The IPv6 PIM neighbor lifetime is 105 seconds.

Views

IPv6 PIM view

Predefined user roles

network-admin

mdc-admin

Parameters

time: Specifies an IPv6 PIM neighbor lifetime in the range of 1 to 65535 seconds. If you set the value to 65535 seconds, the IPv6 PIM neighbors are always reachable.

Usage guidelines

You can set the IPv6 PIM neighbor lifetime globally for all interfaces in IPv6 PIM view or for an interface in interface view. For an interface, the interface-specific configuration takes priority over the global configuration.

Examples

# Set the global IPv6 PIM neighbor lifetime to 120 seconds on the public network.

<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option holdtime 120

Related commands

ipv6 pim hello-option holdtime