hello-option dr-priority (IPv6 PIM view)
Use hello-option dr-priority to set the DR priority globally.
Use undo hello-option dr-priority to restore the default.
Syntax
hello-option dr-priority priority
undo hello-option dr-priority
Default
The DR priority is 1.
Views
IPv6 PIM view
Predefined user roles
network-admin
mdc-admin
Parameters
priority: Specifies a DR priority in the range of 0 to 4294967295. The greater the value, the higher the priority.
Usage guidelines
You can set the DR priority globally for all interfaces in IPv6 PIM view or for an interface in interface view. For an interface, the interface-specific configuration takes priority over the global configuration.
Examples
# Set the global DR priority to 3 on the public network.
<Sysname> system-view [Sysname] ipv6 pim [Sysname-pim6] hello-option dr-priority 3
Related commands
ipv6 pim hello-option dr-priority