state-refresh-ttl (PIM view)
Use state-refresh-ttl to set the TTL value for state refresh messages.
Use undo state-refresh-ttl to restore the default.
Syntax
state-refresh-ttl ttl-value
undo state-refresh-ttl
Default
The TTL value for state refresh messages is 255.
Views
PIM view
Predefined user roles
network-admin
mdc-admin
Parameters
ttl-value: Specifies the TTL value for state refresh messages, in the range of 1 to 255.
Examples
# Set the TTL value to 45 for state refresh messages on the public network.
<Sysname> system-view [Sysname] pim [Sysname-pim] state-refresh-ttl 45
Related commands
pim state-refresh-capable (PIM view)
state-refresh-interval (PIM view)
state-refresh-rate-limit (PIM view)