state-refresh-rate-limit (PIM view)
Use state-refresh-rate-limit to set the waiting time to accept a new state refresh message.
Use undo state-refresh-rate-limit to restore the default.
Syntax
state-refresh-rate-limit time
undo state-refresh-rate-limit
Default
The device waits 30 seconds before it accepts a new state refresh message.
Views
PIM view
Predefined user roles
network-admin
mdc-admin
Parameters
time: Specifies the waiting time to accept a new refresh message, in the range of 1 to 65535 seconds.
Examples
# Set the waiting time to 45 seconds to accept a new state refresh message on the public network.
<Sysname> system-view [Sysname] pim [Sysname-pim] state-refresh-rate-limit 45
Related commands
pim state-refresh-capable
state-refresh-interval (PIM view)
state-refresh-ttl (PIM view)