Replacing a power monitoring module

To replace the power monitoring module:

1. Remove the power monitoring module.

   1. Loosen the captive screws on the power monitoring module.

   2. Pull out the power monitoring module slowly along the slide rails.

   Figure 53: Removing a power monitoring module

   

2. Put the removed power monitoring module in an antistatic bag or in its original shipping materials.

3. Install the new power monitoring module.

   1. Unpack a new power monitoring module.

   2. Insert the power monitoring module slowly along the slide rails until it fits in completely.

   3. Fasten the captive screws on the power monitoring module.

   Figure 54: Installing the power monitoring module