Connecting an AC power cord

Each Power receptacle corresponds to a power module slot. For example, if slot 1 is installed with a power module, the number 1 Power receptacle must be connected to a power source with an AC power cord to make the power module operate correctly.

The AC power system for the 12500E requires 16A AC power cords. You need to prepare 16A power strips, and make sure the AC power supply system can provide enough power. For AC power cords used in different countries or regions, see "Appendix A Technical specifications."

The 12508E-AC and 12518E-AC models adopt the PSE20KA1 AC power system.

To connect the PSE20KA1 AC power cords:

1. Secure the power cabling rack to the power frame using screws with spring washers and flat washers.

   Figure 30: Installing the power cabling rack

   

2. Insert the connector of an AC power cord into the power receptacle.

3. Secure the AC power cord to the cabling rack with cable ties.

4. Repeat steps 2 and 3 to organize and secure other AC power cords.

5. Connect the other end of the AC power cords to the power source.