ipv6 nd autoconfig other-flag

Use ipv6 nd autoconfig other-flag to set the other stateful configuration flag (O) to 1 in RA advertisements to be sent.

Use undo ipv6 nd autoconfig other-flag to restore the default.

Syntax

ipv6 nd autoconfig other-flag

undo ipv6 nd autoconfig other-flag

Default

The O flag is set to 0 in RA advertisements. Hosts receiving the advertisements will acquire other information through stateless autoconfiguration.

Views

Interface view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

The O flag in RA advertisements determines whether receiving hosts use stateful autoconfiguration to obtain configuration information other than IPv6 addresses.

Examples

# Set the O flag to 0 in RA advertisements to be sent.

<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] undo ipv6 nd autoconfig other-flag