ipv6 nd autoconfig managed-address-flag

Use ipv6 nd autoconfig managed-address-flag to set the managed address configuration flag (M) to 1 in RA advertisements to be sent.

Use undo ipv6 nd autoconfig managed-address-flag to restore the default.

Syntax

ipv6 nd autoconfig managed-address-flag

undo ipv6 nd autoconfig managed-address-flag

Default

The M flag is set to 0 in RA advertisements. Hosts receiving the advertisements will obtain IPv6 addresses through stateless autoconfiguration.

Views

Interface view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

The M flag in RA advertisements determines whether receiving hosts use stateful autoconfiguration to obtain IPv6 addresses.

• If the M flag is set to 1 in RA advertisements, receiving hosts use stateful autoconfiguration (for example, from an DHCPv6 server) to obtain IPv6 addresses.

• If the M flag is set to 0 in RA advertisements, receiving hosts use stateless autoconfiguration. Stateless autoconfiguration generates IPv6 addresses according to link-layer addresses and the prefix information in the RA advertisements.

Examples

# Set the M flag to 1 in RA advertisements to be sent.

<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd autoconfig managed-address-flag