Configuring actions for an IPv6 node

1. Enter system view.

system-view

N/A

2. Enter IPv6 policy node view.

ipv6 policy-based-route policy-name [ deny | permit ] node node-number

N/A

3. Set an IP precedence.

apply precedence { type | value }

By default, no IP precedence is specified.

4. Set next hops for permitted IPv6 packets.

apply next-hop [ vpn-instance vpn-instance-name ] { ipv6-address [ direct ] [ track track-entry-number ] }&<1-2>

By default, no next hop is specified.

You can specify two next hops for backup by executing this command twice.

5. Set output interfaces.

apply output-interface { interface-type interface-number [ track track-entry-number ] }

By default, no output interface is specified.