Setting match criteria for an IPv6 node
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter IPv6 policy node view. | ipv6 policy-based-route policy-name [ deny | permit ] node node-number | N/A |
3. Set an ACL match criterion. | if-match acl { ipv6-acl-number | name ipv6-acl-name } | By default, no ACL match criterion is set. |
![[NOTE: ]](images/note.png) | NOTE: If an ACL match criterion is defined, packets are compared with the ACL rules, and the permit or deny action and the time range of the specified ACL are ignored. If the specified ACL does not exist, no packet is matched. | |