Disabling route recursion policy control for routes received from a peer or peer group

If you configure routing policy-based recursive lookup for BGP routes, this route recursion policy applies to BGP routes learned from all peers. This task allows you to disable route recursion policy control for routes learned from certain peers, for example, direct EBGP peers.

To disable route recursion policy control for routes received from a peer or peer group:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter BGP instance view or BGP-VPN instance view.	Enter BGP instance view:bgp as-number [ instance instance-name ] Enter BGP-VPN instance view: bgp as-number [ instance instance-name ] ip vpn-instance vpn-instance-name	N/A
3. Disable route recursion policy control for routes received from the specified peer or peer group.	peer { group-name \| ip-address [ mask-length ] \| ipv6-address [ prefix-length ] } nexthop-recursive-policy disable	By default, the route recursion policy applies to routes received from the peer or peer group.

prev	up	next
Setting a DSCP value for outgoing BGP packets	home	Enabling per-prefix label allocation