Setting a DSCP value for outgoing BGP packets

The DSCP value of an IP packet specifies the priority level of the packet and affects the transmission priority of the packet.

To set a DSCP value for outgoing BGP packets:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter BGP instance view or BGP-VPN instance view.	Enter BGP instance view:bgp as-number [ instance instance-name ] Enter BGP-VPN instance view: bgp as-number [ instance instance-name ] ip vpn-instance vpn-instance-name	N/A
3. Set a DSCP value for outgoing BGP packets.	peer { group-name \| ipv4-address [ mask-length ] \| ipv6-address [ prefix-length ] } dscp dscp-value	By default, the DSCP value for outgoing BGP packets is 48.

prev	up	next
Flushing the suboptimal BGP route to the RIB	home	Disabling route recursion policy control for routes received from a peer or peer group