Configuring the maximum number of ECMP routes
Perform this task to implement load sharing over ECMP routes.
To configure the maximum number of ECMP routes:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter IS-IS IPv4 unicast address family view. | isis [ process-id ] [ vpn-instance vpn-instance-name ] cost-style { wide | wide-compatible } address-family ipv4 [ unicast ] | N/A |
3. Specify the maximum number of ECMP routes. | maximum load-balancing number | By default, the maximum number of ECMP routes supported by IS-IS equals the maximum number of ECMP routes supported by the system. |