Configuring IPv6 load sharing based on bandwidth
This feature shares IPv6 traffic among multiple output interfaces based on their expected load percentages. The device calculates the load percentage for each output interface in terms of the interface expected bandwidth.
For devices that run load sharing protocols such as Locator/ID Separation Protocol (LISP), they implement load sharing based on the ratios defined by these protocols.
To configure IPv6 load sharing based on bandwidth:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable IPv6 load sharing based on bandwidth. | ipv6 bandwidth-based-sharing | By default, IPv6 bandwidth-based load sharing is disabled. |
3. Enter interface view. | interface interface-type interface-number | N/A |
4. Set the expected bandwidth of an interface. | bandwidth bandwidth | By default, the expected bandwidth of an interface equals the absolute bandwidth of the link. |