Enabling IPv6 local fragment reassembly
Perform this task to enable the local reassembly feature for IPv6 fragments that are destined for the local device.
In a multichassis IRF fabric, this feature enables the receiving subordinate to reassemble the received IPv6 fragments instead of delivering them to the master for reassembly. It improves the fragment reassembly performance.
To enable IPv6 local fragment reassembly:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable IPv6 local fragment reassembly. | ipv6 reassemble local enable | By default, IPv6 local fragment reassembly is disabled. This feature applies only to fragments received by the same subordinate. |