Enabling the VPN peer-based processing
This feature enables the device to use the VPN peer ID of the routing information in the FIB table to process packets.
This command must be used together with the apply vpn-peer-id command. For more information about the command, see Layer 3—IP Routing Command Reference.
To enable the VPN peer-based processing:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable the VPN peer-based processing. | ip forwarding apply vpn-peer-id enable | By default, the VPN peer-based processing is disabled. |