Enabling the DSCP setting for packets
This featureenables the device to use the DSCP value in the FIB table for packets to be forwarded. The DSCP value in FIB table is set along with the routing information.
This command must be used together with the apply dscp command. For more information about the command, see Layer 3—IP Routing Command Reference.
To enable the DSCP setting for packets:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable the DSCP setting for packets. | ip forwarding apply dscp enable | By default, the DSCP setting for packets is disabled. |