Binding logical voice subscriber line to POTS entity

1. Enter system view.

system-view

N/A

2. Enter E1/T1 interface view.

controller { e1 | t1 } slot-number

N/A

3. Create a TS set according to the selected signaling mode.

timeslot-set ts-set-number timeslot-list timeslots-list signal { e&m-delay | e&m-immediate | e&m-wink | fxo-ground | fxo-loop | fxs-ground | fxs-loop | r2 }

N/A

4. Exit E1/T1 interface view.

quit

N/A

5. Enter voice view.

voice-setup

N/A

6. Enter voice dial program view.

dial-program

N/A

7. Create a POTS entity and enter POTS entity view.

entity entity-number pots

N/A

8. Bind a logical voice subscriber line to a POTS entity.

line slot-number:ts-set-number

Optional.

By default, no logical voice subscriber line is bound to any POTS entity.