Configuring options related to dial plan
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter E1/T1 interface view. | controller { e1 | t1 } slot-number | N/A |
3. Create a TS set according to the selected signaling mode. | timeslot-set ts-set-number timeslot-list timeslots-list signal { e&m-delay | e&m-immediate | e&m-wink | fxo-ground | fxo-loop | fxs-ground | fxs-loop | r2 } | N/A |
4. Exit E1/T1 interface view. | quit | N/A |
5. Enter voice subscriber line view. | subscriber-line slot-number:ts-set-number | N/A |
6. Enable the private line auto ring function. | private-line string | Optional. Disabled by default. |
7. Bind a calling/called number substitution rule list to a voice subscriber line. | substitute { called | calling } list-number | By default, no calling/called number substitution rule list is bound to a voice subscriber line. |
For more information about the above commands, see HPE FlexNetwork MSR Router Series Comware 5 Voice Command Reference.