Configuration procedure
To configure X2T:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Enable X.25 switching. | x25 switching | N/A |
3. Configure an X.25 interface. | See "Configuring the basic parameters of an X.25 interface." | Unnecessary to specify an X.121 address for the interface. |
4. Configure an IP interface. | See Layer 3—IP Services Configuration Guide. | N/A |
5. Configure an X.25-to-IP X2T forwarding route. | translate x25 x.121-address ip ip-address port port-number | N/A |
6. Configure an IP-to-X.25 X2T forwarding route. |
| N/A |