Applying an ACL in DLSw

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Create a MAC-based Layer 2 ACL.	acl number acl-number [ match-order { auto \| config } ] rule [ rule-id ] { deny \| permit } [ fragment \| logging \| source { sour-addr sour-wildcard \| any } \| time-range time-name \| vpn-instance vpn-instance-name ] *	No Layer 2 ACL is configured by default.
3. Return to system view.	quit	N/A
4. Apply a MAC-based ACL to inbound traffic, outbound traffic, or both.	dlsw ethernet-frame-filter acl-number inbound dlsw ethernet-frame-filter acl-number outbound	By default, no ACL is applied. ACLs for inbound and outbound traffic can be configured at the same time.

For more information about creating a Layer 2 ACL, see HPE FlexNetwork MSR Router Series Comware 5 ACL and QoS Configuration Guide.

prev	up	next
Configuring the maximum number of DLSw v2.0 explorer retries	home	Configuring DLSw Ethernet redundancy