Configuring DCC overlap receiving
By default, DCC operates in non-overlap receiving mode. A DCC called party starts establishing a DCC connection as soon as the first digit of the called number is received, instead of waiting for the complete called number to be gathered. With overlap receiving enabled, a DCC called party will not start establishing a DCC connection until the complete called number is received.
Configure the overlap receiving mode only when DCC is configured on the current ISDN physical interface.
Generally, you do not need to configure this feature. In the North American market, however, you might need to configure this feature for interoperability purposes.
To configure DCC overlap receiving:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter dialup interface (ISDN physical interface) view. | interface interface-type interface-number | N/A |
3. Configure DCC to operate in overlap receiving mode. | dialer overlap-receiving | By default, DCC operates in non-overlap receiving mode. |