Configuring circular dial string backup
In C-DCC, configure multiple dialer route commands for the dial strings used to call a destination address. These dial strings are backups to each other. If DCC fails to call the remote end with a dial string, it will select the dialer route command with the next dial string for another try.
To configure circular dial string backup:
Step | Command |
---|---|
1. Enter system view. | system-view |
2. Enter dialup interface (physical or dialer interface) view. | interface interface-type interface-number |
3. Repeat this step to associate multiple dial strings with the same next-hop-address. | dialer route protocol next-hop-address [ mask network-mask-length ] [ user hostname | broadcast ] * dial-number [ autodial | interface interface-type interface-number ] * |