Configuring MPoFR

Multilink PPP over Frame Relay (MPoFR) enables Frame Relay stations to transmit MP fragments between them.

To configure MPoFR:

• Configure at least two virtual templates for PPPoFR, without assigning IP addresses to them.

• Create a virtual template for MP and bind the PPPoFR virtual templates with this MP virtual template.

To ensure transmission quality over virtual template interfaces, configure queue-independent QoS features on the virtual interfaces and queue-dependent QoS features on the FR interface. For more information, see HPE FlexNetwork MSR Router Series Comware 5 ACL and QoS Configuration Guide.

When you configure a static route for a virtual-template interface, specify only the next hop. If you want to specify the outbound interface as well, make sure the physical interface bound to the virtual template interface is up.

For more information about MP configuration, see "Configuring PPP and MP."