Configuration procedure

Configure Router A:

# Create and configure virtual template interface Virtual-Template 1.

<RouterA> system-view
[RouterA] interface virtual-template 1
[RouterA-Virtual-Template1] ip address 10.1.1.2 255.0.0.0
[RouterA-Virtual-Template1] quit

# Configure Serial 2/0.

[RouterA] interface serial 2/0
[RouterA-Serial2/0] link-protocol fr

# Create PPP mapping on Serial 2/0.

[RouterA-Serial2/0] fr map ppp 16 interface virtual-template 1

Configure Router B:

# Create and configure virtual template interface Virtual-Template 1.

<RouterB> system-view
[RouterB] interface virtual-template 1
[RouterB-Virtual-Template1] ip address 10.1.1.1 255.0.0.0
[RouterB-Virtual-Template1] quit

# Configure Serial 2/0.

[RouterB] interface serial 2/0
[RouterB-Serial2/0] link-protocol fr
[RouterB-Serial2/0] fr interface-type dce

# Create DLCI 16.

[RouterB-Serial2/0] fr dlci 16
[RouterB-fr-dlci-Serial2/0-16] quit

# Create PPP map on Serial 2/0.

[RouterB-Serial2/0] fr map ppp 16 interface virtual-template 1