Configuring an MFR bundle link
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter frame relay interface view. | interface interface-type interface-number | N/A |
3. Assign the current interface to an MFR interface. | link-protocol fr mfr interface-number | By default, an interface is not assigned to any MFR interface. |
4. Configure the MFR bundle link identifier. | mfr link-name [ name ] | Optional. By default, the name of the current interface is used. |
5. Configure the hello message sending interval for the MFR bundle link. | mfr timer hello seconds | Optional. The default setting is 10 seconds. |
6. Configure the waiting time before the MFR bundle link resends hello messages. | mfr timer ack seconds | Optional. The default setting is 4 seconds. |
7. Configure the maximum times that the MFR bundle link can resend hello messages. | mfr retry number | Optional. The default setting is 2. |