Configuring an MFR bundle
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Create an MFR interface and enter MFR interface view. | interface mfr { interface-number | interface-number.subnumber [ p2mp | p2p ] } | By default, no MFR interface or subinterface exists. Before creating an MFR subinterface, make sure the specific main MFR interface already exists. |
3. Set the MFR bundle identifier. | mfr bundle-name [ name ] | Optional. The default bundle identifier is MFR + frame relay bundle number, for example, MFR4. You cannot set a bundle identifier in the MFR number format. |
4. Enable MFR fragmentation. | mfr fragment | Optional. By default, MFR fragmentation is disabled. |
5. Configure the size of the MFR sliding window. | mfr window-size number | Optional. By default, the size of the MFR sliding window is equal to the number of physical interfaces bundled by MFR. |
6. Configure maximum fragment size for bundle link. | mfr fragment-size bytes | Optional. The default setting is 300 bytes. |
7. Set the intended bandwidth for the MFR interface. | bandwidth bandwidth-value | Optional. |
8. Configure other parameters of the MFR interface. | See "Configuring frame relay." | Optional. The fr interface-type command and the fr inarp command are applicable to only main MFR interfaces. |