Configuration procedure
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Create a WRED table and enter its view. | qos wred queue table table-name | N/A |
3. Configure the other WRED parameters. | queue queue-value low-limit low-limit [ discard-probability discard-prob ] | Optional. |
4. Enter interface view or port group view. |
| Settings in interface view take effect on the current interface. Settings in port group view take effect on all ports in the port group. |
5. Apply the WRED table to the interface or port group. | qos wred apply table-name | A queue-based WRED table is available on only Layer 2 ports. |