Configuration procedure
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter POS interface view or serial interface view. | interface interface-type interface-number | N/A |
3. Enable HDLC encapsulation on the interface. | link-protocol hdlc | By default, PPP encapsulation is enabled on an interface. |
4. Assign the interface to an HDLC link bundle. | bundle id bundle-id | By default, an interface is not assigned to any HDLC link bundle. |
5. Set the bundling priority for the member interface. | bundle member-priority priority | The default setting is 32768. |