Setting the maximum number of PPPoE sessions
PPPoE can establish a session when none of the following limits are reached:
Limit for a user on an interface.
Limit for a VLAN on an interface.
Limit on an interface.
Limit on a card.
New maximum number settings apply only to subsequently established PPPoE sessions.
To configure the maximum number of PPPoE sessions:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter Layer 3 Ethernet interface/subinterface, VLAN interface, Layer 3 aggregate interface/subinterface, or L3VE interface/subinterface view. | interface interface-type interface-number | The PPPoE server is enabled on the interface. |
3. Set the maximum number of PPPoE sessions on an interface. | pppoe-server session-limit number | By default, the number of PPPoE sessions on an interface is not limited. |
4. Set the maximum number of PPPoE sessions for a VLAN on an interface. | pppoe-server session-limit per-vlan number | By default, the number of PPPoE sessions for a VLAN on an interface is not limited. |
5. Set the maximum number of PPPoE sessions for a user on an interface. | pppoe-server session-limit per-mac number | By default, a user is allowed to create a maximum of 100 PPPoE sessions. |
6. Return to system view. | quit | N/A |
7. Set the maximum number of PPPoE sessions on the specified card (in standalone mode). | pppoe-server session-limit slot slot-number total number | By default, the number of PPPoE sessions on a card is not limited. |
8. Set the maximum number of PPPoE sessions on a card of an IRF member device (in IRF mode). | pppoe-server session-limit chassis chassis-number slot slot-number total number | By default, the number of PPPoE sessions on a card is not limited. |