Adding the switch to UAM
Click the User tab.
From the navigation tree, select User Access Policy > Access Device Management > Access Device.
The access device list is displayed, as shown in Figure 2.
Figure 2: Accessing the Access Device page
On the access device list, click Add.
The Add Access Device page opens, as shown in Figure 3.
Figure 3: Adding an access device
Add the switch to UAM as an access device.
You can add a device to UAM either manually or by selecting the device from the IMC platform. This example uses the Add Manually option.
To add an access device manually:
Click Add Manually.
The Add Access Device Manually page opens.
Enter 192.168.75.2 in the Device IP field, as shown in Figure 4.
Figure 4: Manually adding an access device
Click OK to return to the Add Access Device page.
Configure access information for the access device, as shown in Figure 5:
Enter 1812 in the Authentication Port field and 1813 in the Accounting Port field.
Select H3C (General) from the Access Device Type list.
Enter movie in the Shared Key and Confirm Shared Key fields.
Use the default values for other parameters.
Figure 5: Configuring the access device
Click OK.
On the page that opens, click the Back to Access Device List link to view the added access device in the access device list, as shown in Figure 6.
Figure 6: Viewing the new access device
