`show ipv6 ospfv3 interface`

Syntax

show ipv6 ospfv3 [<INSTANCE-TAG>] interface [<INTERFACE-NAME>] [brief] 
[all-vrfs | vrf <VRF-NAME>] [vsx-peer]

Description

Shows information about OSPFv3 enabled interfaces.

Command context

Operator (>) or Manager (#)

Parameters

<INSTANCE-TAG>: Specifies an OSPFv3 Process ID optionally to show the OSPFv3 enabled interfaces for the particular OSPFv3 process. Range: 1-63.
<INTERFACE-NAME>: Selects to show information only for the specified OSPFv3 enabled interface.
brief: Select to show the overview information for the OSPFv3 enabled interface.
all-vrfs: Optionally, select to show OSPF-enabled interface information for all VRFs.
vrf <VRF-NAME>: Optionally, select to show OSPF-enabled interface information for a particular VRF. If a <VRF-NAME> is not specified, OSPF-enabled interface information is displayed for the default VRF.
[vsx-peer]: Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Examples

Showing OSPFv3 information for all interfaces:

switch# show ipv6 ospfv3 interface
Interface 1/1/1 is up, Line Protocol is up
-------------------------------------------

IPv6 address fe80::7272:cfff:fe70:67ae
Process ID 1 VRF default, Area 0.0.0.0
    State Backup-dr, Status up, Network type Broadcast
    Link Speed 1000 Mbps
    Cost Configured 1, Calculated 4
    Transit Delay 1 sec, Router priority 1
    Designated Router ID: 3.3.3.3
    Backup Designated Router ID: 1.1.1.3
    Timer Intervals: Hello 10, Dead 40, Retransmit 5
    Number of Link LSAs: 2, checksum sum 26868

Interface vlan10 is up, Line Protocol is up
--------------------------------------------
IPv6 address fe80::7272:cfff:fe70:67ae
Process ID 1 VRF default, Area 0.0.0.1
    State Dr, Status up, Network type Broadcast
    Link Speed 1000 Mbps
    Cost Configured 1, Calculated 4
    Transit Delay 1 sec, Router priority 1
    Designated Router ID: 1.1.1.3
    No backup designated router on this network
    Timer Intervals: Hello 10, Dead 40, Retransmit 5
    Number of Link LSAs: 1, checksum sum 9168

Interface loopback10 is up, Line Protocol is up
------------------------------------------------

IPv6 address fe80::7272:cfff:fe00:b627
Process ID 1 VRF default, Area 0.0.0.0
    State Loopback, Status up, Network type Loopback
    Link Speed NA
    Cost Configured 1, Calculated NA
    Transit Delay 1 sec, Router Priority 1
    No designated router on this network
    No backup designated router on this network
    Timer Intervals: Hello 10, Dead 40, Retransmit 5
    Number of Link LSAs: 0, checksum sum 0

Showing overview information for OSPFv3 enabled interfaces for all VRFs:

switch# show ipv6 ospfv3 interface brief all-vrfs
OSPFv3 Process ID 1 VRF default
================================

Total Number of Interfaces: 2

Interface     Area          Cost      State            Status
--------------------------------------------------------------
1/1/1         0.0.0.0       1         Backup-dr        up
vlan10        0.0.0.1       1         Dr               up

OSPFv3 Process ID 2 VRF red
============================

Total Number of Interfaces: 1

Interface     Area          Cost      State            Status
---------------------------------------------------------------
1/1/2         0.0.0.1       1         Backup-dr        up