show ipv6 ospfv3 border-routers

Description

Shows the OSPFv3 routing table entries for Area Border Router (ABR) and Autonomous System Border Router (ASBR).

Command context

Operator (>) or Manager (#)

Parameters

<INSTANCE-TAG>

Specifies an OSPFv3 Process ID to show the OSPFv3 routing table entries for ABR and ASBR for the particular OSPFv3 process. Range: 1-63.

all-vrfs

Optionally, selects to show OSPFv3 border router information for all VRFs.

vrf <VRF-NAME>

Optionally, selects to show OSPFv3 border router information for a particular VRF. If the VRF is not specified, information shows for the default VRF.

[vsx-peer]

Shows the output from the VSX peer switch. If the switches do not have the VSX configuration or the ISL is down, the output from the VSX peer switch is not displayed.

Authority

Operators or Administrators. Users without administrator authority can execute this command from the operator context (>) only.

Example

Showing OSPFv3 border routers information:

switch# show ipv6 ospfv3 border-routers vrf vrf_red
OSPFv3 Process ID 2, VRF vrf_red, Internal Routing Table
--------------------------------------------------------

Codes: i - Intra-area route, I - Inter-area route

i 1.1.1.1 [1], ASBR, Area 0.0.0.0, SPF 9 via
        fe80::7272:cfff:fe9a:a15d, Interface 1/1/2
i 3.3.3.3 [1], ASBR, Area 1.1.1.1, SPF 9 via
        fe80::7272:cfff:fe1f:d80, Interface 1/1/5