rate-limit unknown-unicast in kbps

Description

Sets a rate limit for unicast flood traffic.

Command context

interface

Parameters

in

Sets a rate limit for incoming unicast flood traffic.

percent

Specifies the rate limit as a percentage of the total available bandwidth.

kbps

Specifies the rate limit in Kb/s.

Examples

switch(config)# int 1
switch(eth-1)# rate-limit
all                   Set a rate limit for all traffic.
bcast                 Set a rate limit for broadcast traffic.
icmp                  Set a rate limit for ICMP traffic.
mcast                 Set a rate limit for multicast traffic.
queues                Set a rate limit for each traffic queue.
unknown-unicast       Set a rate limit for unicast flood traffic.
switch(eth-1)# rate-limit unknown-unicast
in                    Set a rate limit for incoming unicast flood traffic.
switch(eth-1)# rate-limit unknown-unicast  in
kbps
percent
switch(eth-1)# rate-limit unknown-unicast  in kbps 100
switch(eth-1)# show rate-limit
all                   Show total traffic rate limits.
bcast                 Show broadcast traffic rate limits.
icmp                  Show ICMP traffic rate limits.
mcast                 Show multicast traffic rate limits.
queues                Show limits for outgoing queue traffic.
unknown-unicast       Show unicast flood traffic rate limits.
switch(eth-1)# show rate-limit unknown-unicast

Unknown-Unicast Traffic Rate Limit Maximum %

  Port  | Inbound Limit Mode
  ----- + ------------- ---------
  1     | 100            kbps
  2     | Disabled      Disabled
  3     | Disabled      Disabled
  4     | Disabled      Disabled
  5     | Disabled      Disabled
  6     | Disabled      Disabled
  7     | Disabled      Disabled
  8     | Disabled      Disabled
  9     | Disabled      Disabled
  10    | Disabled      Disabled
  11    | Disabled      Disabled
  12    | Disabled      Disabled
  13    | Disabled      Disabled
  14    | Disabled      Disabled
  15    | Disabled      Disabled
  16    | Disabled      Disabled