ipv6 source-binding
Syntax
[no] ipv6 source-binding VLAN-ID IPV6-ADDR MAC-ADDR PORT-NUM IPV6-ADDR
Description
Add a DHCPv6 static binding entry into the binding table. Static binding entries will have infinite lifetime.
Parameters and options
- VLAN-ID
The VLAN ID of the static binding entry.
- Ipv6-ADDRESS
The Ipv6 address of the static binding entry.
- MAC-ADDRESS
The MAC address of the static binding entry.
- [ethernet] PORT-NUM
Port number of the static binding entry.
- IPV6-ADDR
The Ipv6 link-local address of the static binding entry.
Validation rules
Validation |
Error/Warning/Prompt |
|---|---|
Verify whether the vlan id is proper |
Invalid input:%s |
Verify whether the mac-address is valid |
Invalid input:%s |
Verify whether the ipv6 address is valid |
Invalid input:%s |
Verify whether the port number is valid on the device |
Module not present for port or invalid port: <port-num> |
If any other addresses other than global unicast address are entered |
Invalid Ipv6 address |
If the ipv6 address entered is not a unicast. |
Only Ipv6 unicast addresses are supported. |
If a multicast ipv6 address is entered to configure a binding. |
Cannot configure a binding using a multicast IPV6 address. |
If an invalid MAC address is being added into the binding table. |
Cannot add a %s MAC address to the table. |
If an invalid port is used for configuring a static binding |
Port %s is invalid. |
If DSNOOPV6 is globally disabled when configuring a static binding. |
Cannot configure static binding whenDHCPv6 Snooping is disabled. |
While configuring a static binding if the Ipv6 address is already present in the Binding table but the entered vlanid and MAC address doesnot match with the one present in the binding table. |
%s has already been assigned to a VID/MAC. Delete the existing binding first. |
If a binding which does not exist in the binding table is tried to be removed. |
Binding for %s not found. |
If DIPLDv6 limits are exceeded on the switch. |
Cannot add the IPv6 source binding because the number of source bindings exceeds the maximum limit of “STR(DSNOOPV6_MAX_STATIC_LEASES)”. |
If more than 4 IPv6 addresses are being assigned to a VID/MAC pair |
Cannot add the IPv6 source binding because only “STR(DHCPV6_MAX_IAADDRS)”IPv6 addresses can be bound to a VID-MAC pair. |
If a VID-MAC pair is bound to a link-local address and the same VID-MAC pair is being assigned another link-local address. |
%s is already bound to a link-local address. To bind another link-local address, delete the existing binding . |
If a binding exists for a particular client in the BST and the same binding is being configured for another port. |
The IPv6 source binding already exists for another port. |
If the switch total limit for bindings is exceeded. |
Cannot add the IPv6 source binding because the number of source bindings exceeds the maximum limit of STR(DSNOOPV6_MAX_STATIC_LEASES). |
If a trunk is being configured for a port which has static binding configured on it. |
Cannot add a port to a trunk group when IPv6 source binding is configured on that port. |
If static binding is being configured on a Smart Link enabled port |
Cannot configure IPv6 source binding on a Smart Link port. |
If Smart Link is being configured on a port with static binding. |
Cannot configure Smart Link feature on a port when IPv6 source binding is configured on that port. |