Show key information

Use the show running-config command to display the key information.

switch(config) show running-config

Running configuration:

; JL074A Configuration Editor; Created on release #KB.xx.xx.0000x
; Ver #14:0f.6f.f8.1d.fb.7f.bf.bb.ff.7c.59.fc.7b.ff.ff.fc.ff.ff.3f.ef:60

hostname "Aruba-3810M-48G-PoEP-1-slot"
module 1 type jl074x
module 2 type jl074y
tacacs-server host 1001::1 key 
"tacacskey"
snmp-server community "public" unrestricted
oobm
   ip address dhcp-bootp
   ipv6 enable
   ipv6 address dhcp full
   exit
vlan 1
 name "DEFAULT_VLAN"
   untagged 1-48
   ip address dhcp-bootp
   ipv6 enable
   ipv6 address dhcp full
   exit