Show current authentication configurations
Syntax
show authenticationDescription
This command lists the number of login attempts the switch allows in a single login session, and the primary/secondary access methods configured for each type of access.
show authentication
switch(config)# show authentication
Status and Counters - Authentication Information
login Attempts : 3
Lockout Delay : 0
Respect Privilege : Disabled
Bypass Username For Operator and Manager Access : Disabled
| Login Login Login
Access Task | Primary Server Group Secondary
-------------- + ----------- ------------ ----------
Console | Local None
Telnet | Local None
Port-Access | Local None
Webui | Local None
SSH | Two-factor None
Web-Auth | ChapRadius radius None
MAC-Auth | ChapRadius radius None
SNMP | Local None
Local-MAC-Auth | Local None
Enable | Enable Enable
Access Task | Primary Server Group Secondary
-------------- + ----------- ------------ ----------
Console | Local None
Telnet | Local None
Webui | Local None
SSH | Two-factor tacacs None
show authentication two-factor
switch(config)# show authentication
last-login Show, for each switch user, information about the last
successful login and unsuccessful login attempts.
locked-out-users Show, all the users which are in locked state.
two-factor Show, for the two-factor, first and second
authentication methods
switch(config)# show authentication two-factor
| Login Login
Access Task | First Second
-------------- + ----------- ------------
SSH | public-key local
| Enable Enable
Access Task | First Second
-------------- + ----------- ------------
SSH | public-key local
| Login Login
Access Task | First Second
-------------- + ----------- ------------
SSH | certificate local
| Enable Enable
Access Task | First Second
-------------- + ----------- ------------
SSH | certificate local