Traceroute for IPv6

The traceroute6 command enables you to trace the route from a switch to a host device that is identified by an IPv6 address or IPv6 hostname. In the command output, information on each (router) hop between the switch and the destination IPv6 address is displayed. To use a traceroute6 command with an IPv6 hostname or fully qualified domain names, see DNS resolver for IPv6. Each time you perform a traceroute operation, the traceroute command uses the default settings unless you enter different values with each instance of the command. Replies to each traceroute operation are displayed on the console screen. To stop a traceroute operation before it finishes, press [Ctrl] [C].

For more information about how to configure and use a traceroute operation, see the Aruba-OS Switch Management and Configuration Guide.