traceroute6
Syntax
traceroute6 [ipv6-address|hostname][minttl
1 - 255][maxttl
1 - 255][timeout
1 - 120][probes
1 - 5][source
ipv6-addr|vid|loopback
0 - 7|oobm][dstport
1 - 34000][srcport
1 - 34000]
Syntax
traceroute6 [link-local-address %vlan vid|hostname][minttl
1 - 255][maxttl
1 - 255][timeout
1 - 120][probes
1 - 5][source
ipv6-addr|vid|oobm]
Description
Lists the IPv6 address of each hop in the route to the specified destination host device with the time (in microseconds) required for a packet reply to be received from each next-hop device.
Options
ipv6-address
-
IPv6 address of a destination host device.
link-local-address %vlan vlan-id
-
IPv6 link-local address, where %vlan vlan-id specifies the VLAN ID number.
hostname
-
Hostname of an IPv6 host device configured on an IPv6 DNS server.
oobm
-
For switches that have a separate out-of-band management (OOBM) port,
oobm
specifies that the traffic originates from the out-of-band management port. minttl
-
Minimum number of hops allowed for each probe packet sent along the route. Default : 1; Range : 1 - 255
-
If the minttl value is greater than the actual number of hops, the traceroute output displays only the hops equal to or greater than the configured minttl threshold value. The hops below the threshold value are not displayed.
-
If the minttl value is the same as the actual number of hops, only the final hop is displayed in the command output.
-
If the minttl value is less than the actual number of hops, all hops to the destination host are displayed.
-
maxttl
-
Maximum number of hops allowed for each probe packet sent along the route. Valid values: 1 - 255. Default: 30
If the
maxttl
value is less than the actual number of hops required to reach the host, the traceroute output displays only the IPv6 addresses of the hops detected by the configuredmaxttl
value. timeout
-
Number of seconds within which a response is required from the IPv6 device at each hop in the route to the destination host before the traceroute operation times out.
Default : 5 seconds; Range : 1 - 120
probes
-
Number of times a traceroute is performed to locate the IPv6 device at any hop in the route to the specified host before the operation times out.
Default : 3; Range: 1 - 5
source
[ipv6-addr
|vid
]-
The source IPv6 address or VLAN of the traceroute device or the VLAN ID on which the traceroute packet is being sent.
dstport
1 - 34000-
Destination port.
srcport
1 - 34000-
Source port.
Example output
IPv6 traceroute probes
Switch# traceroute6 2001:db8::10
traceroute to 2001:db8::10
1 hop min, 30 hops max, 5 sec. timeout, 3 probes
1 2001:db8::a:1c:e3:3 0 ms 0 ms 0 ms
2 2001:db8:0:7::5 7 ms 3 ms 0 ms
3 2001:db8::214:c2ff:fe4c:e480 0 ms 1 ms 0 ms
4 2001:db8::10 0 ms 1 ms 0 ms
- First three hops
-
Intermediate router hops with the time (in milliseconds) for the switch to receive a response from each of the three probes sent to each router.
- Last hop
-
Destination IPv6 address
Switch# traceroute6 2001:db8::10 maxttl 7
traceroute to fe80::1:2:3:4
1 hop min, 7 hops max, 5 sec. timeout, 3 probes
1 2001:db8::a:1c:e3:3 0 ms 0 ms 0 ms
2 2001:db8:0:7::5 0 ms 0 ms 0 ms
3 * 2001:db8::214:c2ff:fe4c:e480 *
4 * * *
5 * * *
6 * * *
7 * * *
At hop 3, the first and third probes timed out, but the second probe reached the router. Each timed-out probe is displayed with an asterisk (*). The four remaining probes within the configured seven-hop maximum (maxttl) also timed out without finding a next-hop router or the destination IPv6 address.