Printable version

Drivers & software

* RECOMMENDED * Firmware Flash Component for Linux - HP P2000/MSA2000 146GB,300GB SAS 6G SFF Hard Drive (EG0146FARTR and EG0300FARTT)

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - SAS Storage Disk
Version: HPDA(18 May 2012)
Operating System(s): Red Hat Enterprise Linux 4 (AMD64/EM64T)
Red Hat Enterprise Linux 4 (Itanium)
Red Hat Enterprise Linux 4 (x86)
Red Hat Enterprise Linux 5 Server (Itanium)
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (Itanium)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (Itanium)
SUSE Linux Enterprise Server 11 (x86)
File name: CP016147.scexe (4.6 MB)
This Linux Smart Component contains a firmware update for the hard drive models EG0146FARTR (146GB 10K 6G SAS) and EG0300FARTT (300GB 10K 6G SAS) in HP P2000 G3 MSA and MSA2000 G2 configurations.

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.


To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

97d53756e17e58b00cb5a4dd003ed8025cefe0d1992b871d41b6c5f1add2853f CP016147.scexe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

  1. Place the downloaded firmware package in a temporary directory.

  2. Open a Linux command console.

  3. From the directory containing the downloaded file, enable execute access to this module by entering chmod +x CPxxxxxx.scexe, where CPxxxxxx.scexe represents the downloaded file.

  4. Execute the Smart Component by entering a command similar to the following: ./CPxxxxxx.scexe --target <ip_address> --user <username> --passwd <password>

  5. Follow onscreen instructions.

NOTE:
  • Use the -e or -f option when flashing a device, even if it is up to date.

  • Use the -g option when downgrading.

  • For details on supported command options, see the online help by executing the command ./CPxxxxxx.scexe or ./CPxxxxxx.scexe -h.

  • If the user name or password contains an exclamation mark (!), enclose the string in single quotes or enter a backslash (\) before the exclamation point. For example, ’!manage’ or \!manage


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.


Notes:

Deliverable Name:

    Firmware Flash Component for Linux - HP P2000/MSA2000 146GB,300GB  SAS 6G SFF Hard Drive (EG0146FARTR and EG0300FARTT)

Release Version and/or Date:
      HPDA

Previous Version of Firmware:
      HPD9

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems Fixed:

    Firmware version HPDA now correctly reports the maximum drive recommended operating temperature.  The incorrect values reported in previous versions of the FW caused ProLiant system fans to operate at improper speeds.

 Known Issues:
     None

Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any HP P2000 G3 or MSA2000 G2 array controller enclosure.


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Problems Fixed:  

Firmware version HPDA now correctly reports the maximum drive recommended operating temperature.  The incorrect values reported in previous versions of the FW caused ProLiant system fans to operate at improper speeds.

 

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.

Version:HPDA (18 May 2012)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Problems Fixed:  

Firmware version HPDA now correctly reports the maximum drive recommended operating temperature.  The incorrect values reported in previous versions of the FW caused ProLiant system fans to operate at improper speeds.

 

Version:HPD9 (17 Aug 2011)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Resolved an issue with 01/5D/32 error in SMART log.  Read-Write Error Recovery issue may cause HDD to time-out.  Full recovery from this error can take several seconds.

Enhancements

This firmware improves the hard drive servo control which reduces the number of positioning errors.


Version:HPD5 (21 Jul 2010)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Resolved an issue where the HDD may cease to function and recovery from such a failure would require a power cycle, at a minimum.

Enhancements

Initial release with support for HP StorageWorks MSA2000 G2 and P2000 G3 MSA products


Type: Firmware - SAS Storage Disk
Version: HPDA(18 May 2012)
Operating System(s):
Red Hat Enterprise Linux 4 (AMD64/EM64T)
Red Hat Enterprise Linux 4 (Itanium)
Red Hat Enterprise Linux 4 (x86)
Red Hat Enterprise Linux 5 Server (Itanium)
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (Itanium)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (Itanium)
SUSE Linux Enterprise Server 11 (x86)

Description

This Linux Smart Component contains a firmware update for the hard drive models EG0146FARTR (146GB 10K 6G SAS) and EG0300FARTT (300GB 10K 6G SAS) in HP P2000 G3 MSA and MSA2000 G2 configurations.

Installation Instructions

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.


To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

97d53756e17e58b00cb5a4dd003ed8025cefe0d1992b871d41b6c5f1add2853f CP016147.scexe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

  1. Place the downloaded firmware package in a temporary directory.

  2. Open a Linux command console.

  3. From the directory containing the downloaded file, enable execute access to this module by entering chmod +x CPxxxxxx.scexe, where CPxxxxxx.scexe represents the downloaded file.

  4. Execute the Smart Component by entering a command similar to the following: ./CPxxxxxx.scexe --target <ip_address> --user <username> --passwd <password>

  5. Follow onscreen instructions.

NOTE:
  • Use the -e or -f option when flashing a device, even if it is up to date.

  • Use the -g option when downgrading.

  • For details on supported command options, see the online help by executing the command ./CPxxxxxx.scexe or ./CPxxxxxx.scexe -h.

  • If the user name or password contains an exclamation mark (!), enclose the string in single quotes or enter a backslash (\) before the exclamation point. For example, ’!manage’ or \!manage


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.


Notes:

Deliverable Name:

    Firmware Flash Component for Linux - HP P2000/MSA2000 146GB,300GB  SAS 6G SFF Hard Drive (EG0146FARTR and EG0300FARTT)

Release Version and/or Date:
      HPDA

Previous Version of Firmware:
      HPD9

Firmware Dependency:
     None

Enhancements/New Features:
     None

Problems Fixed:

    Firmware version HPDA now correctly reports the maximum drive recommended operating temperature.  The incorrect values reported in previous versions of the FW caused ProLiant system fans to operate at improper speeds.

 Known Issues:
     None

Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any HP P2000 G3 or MSA2000 G2 array controller enclosure.


Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Problems Fixed:  

Firmware version HPDA now correctly reports the maximum drive recommended operating temperature.  The incorrect values reported in previous versions of the FW caused ProLiant system fans to operate at improper speeds.

 

Important

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP 2000 Family Modular Storage Array reference guide.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in P2000/MSA2000 configurations.

Revision History

Version:HPDA (18 May 2012)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Problems Fixed:  

Firmware version HPDA now correctly reports the maximum drive recommended operating temperature.  The incorrect values reported in previous versions of the FW caused ProLiant system fans to operate at improper speeds.

 

Version:HPD9 (17 Aug 2011)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Resolved an issue with 01/5D/32 error in SMART log.  Read-Write Error Recovery issue may cause HDD to time-out.  Full recovery from this error can take several seconds.

Enhancements

This firmware improves the hard drive servo control which reduces the number of positioning errors.


Version:HPD5 (21 Jul 2010)
Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Resolved an issue where the HDD may cease to function and recovery from such a failure would require a power cycle, at a minimum.

Enhancements

Initial release with support for HP StorageWorks MSA2000 G2 and P2000 G3 MSA products


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.