Printable version

Drivers & software

* RECOMMENDED * Firmware Flash Component for Windows - HP MSA 1040/2040, P2000 G3 and MSA2000 G2 900GB, 600GB, 450GB and 300GB 6G SAS 10K rpm SFF Drive Models ( EG0900FBLSK, EG0600FBLSH, EG0450FBLSF and EG0300FBLSE )

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - SAS Storage Disk
Version: HPD8(23 Jun 2015)
Operating System(s): HP-UX 11.23
HP-UX 11.31 (IA)
Microsoft Windows Server 2008 Itanium
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 for Itanium-Based Systems
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Red Hat Enterprise Linux 5 Server (Itanium)
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (Itanium)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (Itanium)
SUSE Linux Enterprise Server 11 (x86)
SUSE Linux Enterprise Server 12
VMware ESXi 5.0
VMware vSphere 5.1
VMware vSphere 5.5
File name: cp025849.exe (2.8 MB)
This Windows Smart Component contains a firmware update for SFF hard drive models EG0900FBLSK (900GB 10K SAS 6G), EG0600FBLSH (600GB 10K SAS 6G), EG0450FBLSF (450GB 10K SAS 6G) and EG0300FBLSE (300GB 10K SAS 6G) in HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Arrays.

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Arrays.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

ec9652e6d7473873ed52c1c7494c4020 cp025849.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

The Smart Component package is a self-extracting executable. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).

GUI option

  1. Place the downloaded firmware package in a temporary directory.
  2. Using Windows Explorer, navigate to the directory containing the download.
  3. Double click the executable file.
  4. Follow onscreen instructions.

CLI option

Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s

where:

  • ip_address is the management IP address of the array controller

  • username is the username account with management rights

  • password is the password for username

Instead of command line parameters you can use the following DOS environment variables:

  • oa_address: set this variable for the IP address of array controller

  • oa_username : set this variable for the username of array controller

  • oa_password : set this variable for the password of that username


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Arrays.


Supported Devices and Features:

Firmware on the listed drives can be updated when attached to any HP MSA 1040/2040 or P2000 G3 or MSA2000 G2 Array Controller Enclosure.

  • HP MSA 2040 SAN Dual Controller SFF Storage
  • HP MSA 2040 SAS Dual Controller SFF Storage
  • HP MSA 1040 2-port 10G iSCSI Dual Controller SFF Storage
  • HP MSA 1040 2-port 1G iSCSI Dual Controller SFF Storage
  • HP MSA 1040 2-port Fibre Channel Dual Controller SFF Storage
  • HP MSA 1040 2-port SAS Dual Controller SFF Storage
  • Modular Smart Array 2324sa
  • Modular Smart Array 2324fc
  • Modular Smart Array 2324i
  • HP P2000 G3 10GbE iSCSI MSA Dual Controller SFF Array System
  • HP P2000 G3 iSCSI MSA Dual Controller SFF Array System
  • HP P2000 G3 SAS MSA Dual Controller SFF Array System
  • HP P2000 G3 MSA FC Dual Controller SFF Modular Smart Array System
  • HP P2000 G3 MSA FC/iSCSI Dual Combo Controller SFF Array

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Following fix is added in HPD8 :

  • Hard disk drive firmware HPD8 resolves the issue where HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported.

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Arrays.

Version:HPD8 (23 Jun 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Following fix is added in HPD8 :

  • Hard disk drive firmware HPD8 resolves the issue where HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported.

Version:HPD7 (13 Dec 2013)
Fixes

Upgrade Requirement:
Critical - HP requires users update to this version immediately.


  • After long-term use, the drive may develop a mechanical condition preventing the heads from fully unloading onto the ramp, potentially causing data loss or mechanical damage after power loss or power cycle. This firmware prevents this condition.
  • Under rare command timing conditions, the drive may abort a write prior to committing data to disk, resulting in data loss. This firmware prevents this condition.

Version:HPD5 (10 Apr 2012)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Added support for EVA.


Version:HPD3 (6 Dec 2011)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Problems Fixed:

This firmware prevents the following:

    Firmware version HPD3 corrects an issue which causes the drive to reset internally when a link is lost due to communication error.  If this issue occurs, it causes aborted commands, which are typically recovered by system error recovery but causes reset entries in the drive error logs and may momentarily slow performance.

Type: Firmware - SAS Storage Disk
Version: HPD8(23 Jun 2015)
Operating System(s):
HP-UX 11.23
HP-UX 11.31 (IA)
Microsoft Windows Server 2008 Itanium
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 for Itanium-Based Systems
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 Essentials
Microsoft Windows Server 2012 R2
Red Hat Enterprise Linux 5 Server (Itanium)
Red Hat Enterprise Linux 5 Server (x86)
Red Hat Enterprise Linux 5 Server (x86-64)
Red Hat Enterprise Linux 6 Server (x86)
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 10 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (Itanium)
SUSE Linux Enterprise Server 10 (x86)
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 11 (Itanium)
SUSE Linux Enterprise Server 11 (x86)
SUSE Linux Enterprise Server 12
VMware ESXi 5.0
VMware vSphere 5.1
VMware vSphere 5.5

Description

This Windows Smart Component contains a firmware update for SFF hard drive models EG0900FBLSK (900GB 10K SAS 6G), EG0600FBLSH (600GB 10K SAS 6G), EG0450FBLSF (450GB 10K SAS 6G) and EG0300FBLSE (300GB 10K SAS 6G) in HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Arrays.

Installation Instructions

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Arrays.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

ec9652e6d7473873ed52c1c7494c4020 cp025849.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

The Smart Component package is a self-extracting executable. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).

GUI option

  1. Place the downloaded firmware package in a temporary directory.
  2. Using Windows Explorer, navigate to the directory containing the download.
  3. Double click the executable file.
  4. Follow onscreen instructions.

CLI option

Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s

where:

  • ip_address is the management IP address of the array controller

  • username is the username account with management rights

  • password is the password for username

Instead of command line parameters you can use the following DOS environment variables:

  • oa_address: set this variable for the IP address of array controller

  • oa_username : set this variable for the username of array controller

  • oa_password : set this variable for the password of that username


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Arrays.


Supported Devices and Features:

Firmware on the listed drives can be updated when attached to any HP MSA 1040/2040 or P2000 G3 or MSA2000 G2 Array Controller Enclosure.

  • HP MSA 2040 SAN Dual Controller SFF Storage
  • HP MSA 2040 SAS Dual Controller SFF Storage
  • HP MSA 1040 2-port 10G iSCSI Dual Controller SFF Storage
  • HP MSA 1040 2-port 1G iSCSI Dual Controller SFF Storage
  • HP MSA 1040 2-port Fibre Channel Dual Controller SFF Storage
  • HP MSA 1040 2-port SAS Dual Controller SFF Storage
  • Modular Smart Array 2324sa
  • Modular Smart Array 2324fc
  • Modular Smart Array 2324i
  • HP P2000 G3 10GbE iSCSI MSA Dual Controller SFF Array System
  • HP P2000 G3 iSCSI MSA Dual Controller SFF Array System
  • HP P2000 G3 SAS MSA Dual Controller SFF Array System
  • HP P2000 G3 MSA FC Dual Controller SFF Modular Smart Array System
  • HP P2000 G3 MSA FC/iSCSI Dual Combo Controller SFF Array

Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Following fix is added in HPD8 :

  • Hard disk drive firmware HPD8 resolves the issue where HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported.

Important

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Array.

NOTE: Disk drive upgrades on the HP MSA 1040/2040, P2000 G3 and MSA2000 G2 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the HP Modular Storage Array 2000 Family Reference Guide. All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log and flashing summary is logged to %systemdrive%\CPQSYSTEM\Log\cpqsetup.log.

IMPORTANT: Please refer to the release notes for special considerations regarding the pre-install conditions for flashing hard drives in HP MSA 1040/2040, P2000 G3 and MSA2000 G2 Storage Arrays.

Revision History

Version:HPD8 (23 Jun 2015)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Following fix is added in HPD8 :

  • Hard disk drive firmware HPD8 resolves the issue where HP ProLiant servers would power down due a hard drive overtemp condition that was falsely reported.

Version:HPD7 (13 Dec 2013)
Fixes

Upgrade Requirement:
Critical - HP requires users update to this version immediately.


  • After long-term use, the drive may develop a mechanical condition preventing the heads from fully unloading onto the ramp, potentially causing data loss or mechanical damage after power loss or power cycle. This firmware prevents this condition.
  • Under rare command timing conditions, the drive may abort a write prior to committing data to disk, resulting in data loss. This firmware prevents this condition.

Version:HPD5 (10 Apr 2012)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Added support for EVA.


Version:HPD3 (6 Dec 2011)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Problems Fixed:

This firmware prevents the following:

    Firmware version HPD3 corrects an issue which causes the drive to reset internally when a link is lost due to communication error.  If this issue occurs, it causes aborted commands, which are typically recovered by system error recovery but causes reset entries in the drive error logs and may momentarily slow performance.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.